hydraulic system repair and maintenance services
hydraulic hoses crimping pressure testing repair and maintenance
Heat Exchanger Mechanical Equipment parts for oil and gas industry
Outback fxr inverter
Outback power Flex power 1 and Flex power 2
outback power radian inverter
Solar Panel Cleaning and maintainance
Solar Golf cart and batteries for golf cart

The FLEXware 500 is for applications with medium power requirements such as homes, light commercial or larger backup power systems.

The FLEXware 500 system architecture can support up to two OutBack FX Series Inverter/Chargers, up to two OutBack charge controllers and all the associated AC and DC components. Due to a very compact design, FLEXware 500 AC and DC enclosures mount with a FLEXware MP in either a horizontal or vertical orientation to allow installation in more space-limited locations for a fast and professional looking wall-mounted installation. The FLEXware 500 accommodates all of the essential protective devices in two enclosures.

Technical Specifications

Model: FW500-DC

DC enclosure which mounts at the DC side of one or two FX Series Inverter/Chargers. Supports up to six terminal bus bars (not including GBB) and up to three shunt assemblies depending on configuration.


Includes: Ground bus bar, 500 Amp DC shunt assembly, positive bus, breaker mounting hardware, FW-BBUS and enclosure mounting hardware

Unit Dimensions 18.2 x 11.4 x 12.1" (46.2 x 29 x 30.7 cm)
Shipping Dimensions 14.5 x 13.4 x 20.3" (36.8 x 34.1 x 51.6 cm)
Shipping Weight 15 lbs. (6.8 kg)
Enclosure Type Type-1 indoor (IP30)

 

Model: FW500-AC

AC enclosure which mounts at the AC side of one or two FX Series Inverter/Chargers. Supports six terminal bus bars and one FW-X240. The FW500 system utilizes one FW-MP (mounting plate) and a set of the DCA and ACA conduit adapters for each inverter/charger. DC and AC breakers, Input-Output-Bypass Assemblies and all other additional components sold separately.


Includes: Ground bus bar, DIN mounting bracket, communication cable conduit and enclosure mounting hardware.

Unit Dimensioins 18.2 x 11.4 x 12.1" (46.2 x 29 x 30.7 cm)
Shipping Dimensions 14.5 x 13.4 x 20.3" (36.8 x 34.1 x 51.6 cm)
Shipping Weight 15 lbs. (6.8 kg)
Enclosure Type Type-1 indoor (IP30)

Assemblies

FLEXware 500 AC Input-Output-Bypass Assemblies

Model: FW-IOB-D-120/240VAC

Field-installable kit for bypassing the AC input to the AC output for inverter maintenance or installation. Also provides over-current protection.

Includes: Six 60A 120VAC single pole DIN mount breakers, sliding bypass interlock plate, wire and hardware kit

System Rating Split Phase 120/240 VAC 60 Amps 14.4 kW
Bypass Breaker Two Poles @ 60 Amps 14.4 kW
Input Breaker Two Poles @ 60 Amps 14.4 kW
Output Breaker Two Poles @ 60 Amps 14.4 kW

 

Model: FW-IOB-D-120VAC

Includes: Four 60A 120VAC single pole DIN mount breakers, one 60A 120VAC dual pole DIN mount breaker, sliding bypass interlock plate, wire and hardware kit

 

System Rating Split Phase 120/240 VAC 60 Amps 14.4 kW
Bypass Breaker Two Poles @ 60 Amps 14.4 kW
Input Breaker Two Poles @ 60 Amps 14.4 kW
Output Breaker Two Poles @ 60 Amps 14.4 kW

 

Model: FW-IOB-D-230VAC

Includes: Six 30A 230VAC single pole DIN mount breakers, sliding bypass interlock plate, wire and hardware kit

System Rating Split Phase 230 VAC 60 Amps 13.8 kW
Bypass Breaker Two Poles @ 30 Amps 13.8 kW
Input Breaker Two Poles @ 30 Amps 13.8 kW
Output Breaker Two Poles @ 30 Amps 13.8 kW
Updated: Sep 21, 2015