hydraulic system repair and maintenance services
hydraulic hoses crimping pressure testing repair and maintenance
Heat Exchanger Mechanical Equipment parts for oil and gas industry
Outback fxr inverter
Outback power Flex power 1 and Flex power 2
outback power radian inverter
Solar Panel Cleaning and maintainance
Solar Golf cart and batteries for golf cart

The FLEXware 250 is for applications with modest power requirements such as cabins, chalets, homes, remote communication sites and backup power systems.

The FLEXware 250 accommodates all of the essential protective devices in the smallest possible space at the lowest installed cost. Utilizing an extremely compact design and unique mounting features, one or two FLEXware 250 enclosures can be mounted on each end of a single FX Series Inverter/Charger. The FLEXware 250 enclosure is contructed of powder-coated aluminum and has been ETL listed. It provides breaker spaces for battery, PV array or PV GFP breakers and mounting locations for AC GFCI outlet, AC breakers and an Input-Output-Bypass Assembly. In keeping with the philosophy of FLEXware, the FLEXware 250's flexibility is evident in the generous number of knock-outs allowing the installation of conduit, cable glands, and other installation accessories.

Technical Specifications 

  • Holds up to eight 1 to 80 Amp, one 175 or 250 Amp panel mount breaker and a GFCI AC outlet (not included).
  • Does not use the DCA or ACA for connection to an FX Series Inverter / Charger.
  • DC current shunt not included
  • DC and/or AC breaker enclosure for one FX Series Inverter / Charger

Includes: Ground bus bar, DC breaker handle guard, breaker mounting hardware and enclosure mounting hardware.

Unit Dimensions (H x W x D) 7.5 x 6.5 x 8.6" (19.1 x 16.5 x 21.8 cm)
Shipping Dimensions (H x W x L) 9.75 x 8.4 x 11.6" (24.8 x 21.3 x 29.5 cm)
Shipping Weight 5 lbs. (2.3 kg)
Enclosure Type Type-1 indoor (IP30


FLEXware 250 AC Input-Output-Bypass Assemblies

Field-installable kit for by-passing the AC input to the AC output for inverter maintenance, testing or installation. Also provides over-current protection for AC input and output.

Includes: Three 60A 120VAC single pole PANEL mount breakers, sliding bypass interlock plate, wire and hardward kit

System Rating Single-Phase 120VAC 60 Amp 7.2 kW
Bypass Breaker One Pole @ 60 Amps 7.2 kW
Input Breaker One Pole @ 60 Amps 7.2 kW
Output Breaker One Pole @ 60 Amps 7.2 kW

Includes: Three 30A 230VAC single pole PANEL mount breakers, sliding bypass interlock plate, wire and hardware kit

System Rating Single-Phase 230VAC 30 Amp 6.9 kW
Bypass Breaker One Pole @ 30 Amps 6.9 kW
Input Breaker One Pole @ 30 Amps 6.9 kW
Output Breaker One Pole @ 30 Amps 6.9 kW
Updated: Sep 21, 2015