hydraulic system repair and maintenance services
hydraulic hoses crimping pressure testing repair and maintenance
Heat Exchanger Mechanical Equipment parts for oil and gas industry
Outback fxr inverter
Outback power Flex power 1 and Flex power 2
outback power radian inverter
Solar Panel Cleaning and maintainance
Solar Golf cart and batteries for golf cart

EmiratesGreen offers OutBack FLEXware PV Combiner Series

The new standard for PV balance-of-system hardware. Ideal for both small or large systems, the FLEXware PV8 and FLEXware PV12 accommodates the overcurrent protection requirements of your application. From 150VDC breakers for low voltage PV systems, to 600VDC fuse holders for high voltage PV systems, the FLEXware PV Combiner series handles it all.

Designed to survive in outdoor environments, the rainproof, UL type 3R powder coated aluminum chassis can be mounted on a wall, sloped roof or pole. The unique angled negative terminal bus bar design makes wiring fast and easy without the larger output conductors blocking access to the smaller input terminals. Dual output lug terminals are included for up to 2/0 AWG conductors. The tinted flame-retardant polycarbonate deadfront panel creates a clean appearance while preventing accidental contact with the live terminals and is easily removable during installation. The FLEXware PV Combiner makes it easy to take your installation to the next level.

Flexware Pv 8 Circuit Breakers Fuses

Holds up to eight OutBack Power Technologies DIN mounted breakers for PV array configurations of 12 to 72 VDC systems with a maximum open circuit voltage of 150 VDC or use six OutBack Power Technologies OBFH "touch safe" type fuse holders for high voltage systems with a maximum open circuit voltage of 600 VDC

Flexware Pv 12 Circuit Breakers Fuses

Holds up to twelve OutBack Power Technologies DIN mounted breakers for PV array configurations of 12 to 72 VDC systems with a maximum open circuit voltage of 150 VDC or use eight OutBack Power Technologies OBFH "touch safe" type fuse holders for high voltage systems with a maximum open circuit voltage of 600 VDC

Technical Specifications

  • Model:FLEXware PV
  • Description: Outdoor rated powder-coated aluminum PV array combiner box
  • Includes: Enclosure, dual combining bus bars, one terminal bus bar, two #1/0 AWG set-screw compression type box lug terminals and one #1/0 AWG ground lug
  FWPV-8 FWPV-12
Enclosure Material Powder coated aluminum with stainless steel hardware Powder coated aluminum with stainless steel hardware
Mounting Options Vertical wall mount, pole mount or sloped roof mount to 14 degrees incline (3 in 12 roof pitch) Vertical wall mount, pole mount or sloped roof mount to 14 degrees incline (3 in 12 roof pitch)
Enclosure Rating Outdoor Rainproof, UL Type 3R Outdoor Rainproof, UL Type 3R
Enclosure Security Padlock hole in chassis and cover for up to 3/8 inch pad lock Padlock hole in chassis and cover for up to 3/8 inch pad lock
Output Terminals #14 - 2/0 AWG (2.08 - 67.43 mm2) Two box lug terminals included #14 - 2/0 AWG (2.08 - 67.43 mm2) Two box lug terminals included
Number of separate circuits One Circuit One or Two Circuits
Number of 150VDC breakers up to 8 up to 12 (two groups of six)
Number of 600VDC fuse holders up to 6 up to 8 (two groups of four)
Input Terminal 150VDC Breakers / #14 - 6 AWG (2.08 - 13.3 mm2) 600VDC Fuse / #14 - 10 AWG (2.08 - 5.26 mm2) 150VDC Breakers / #14 - 6 AWG (2.08 - 13.3 mm2) 600VDC Fuse / #14 - 10 AWG (2.08 - 5.26 mm2)
DimensionsUnit (H x W x D)
Shipping (H x W x L)
15.2 x 9.2 x 3.9" (38.7 x 23.3 x 9.9 cm)
4.3 x 13 x 19" (10.9 x 24.1 x 48.3 cm)
15.2 x 12.7 x 3.9" (38.7 x 32.2 x 9.9 cm)
4.3 x 9.5 x 19" (10.9 x 24.1 x 48.3 cm)
WeightUnit
Shipping
4.4 lbs (2.0 kg)
5.5 lbs (2.5 kg)
5.9 lbs (2.7 kg)
7.4 lbs (3.3 kg)

OutBack DC DIN Mount Breakers

DIN rail mount breakers are hydraulic-magnetic type and are not affected by high ambient temperatures.

MODEL CURRENT RATING VOLTAGE RATING* TERMINALS WIDTH
DIN-1-DC 1 Amp 125VDC #14 to 2 AWG clamp terminals 0.5" (13 mm)
DIN-2-DC 2 Amp 150VDC #14 to 2 AWG clamp terminals 0.5" (13 mm)
DIN-3-DC 3 Amp 150VDC #14 to 2 AWG clamp terminals 0.5" (13 mm)
DIN-4-DC 4 Amp 150VDC #14 to 2 AWG clamp terminals 0.5" (13 mm)
DIN-5-DC 5 Amp 150VDC #14 to 2 AWG clamp terminals 0.5" (13 mm)
DIN-6-DC 6 Amp 150VDC #14 to 2 AWG clamp terminals 0.5" (13 mm)
DIN-8-DC 8 Amp 150VDC #14 to 2 AWG clamp terminals 0.5" (13 mm)
DIN-9-DC 9 Amp 150VDC #14 to 2 AWG clamp terminals 0.5" (13 mm)
DIN-10-DC 10 Amp 150VDC #14 to 2 AWG clamp terminals 0.5" (13 mm)
DIN-15-DC 15 Amp 150VDC #14 to 2 AWG clamp terminals 0.5" (13 mm)
DIN-20-DC 20 Amp 125VDC #14 to 2 AWG clamp terminals 0.5" (13 mm)
DIN-30-DC 30 Amp 150VDC #14 to 2 AWG clamp terminals 0.5" (13 mm)
DIN-50-DC  50 Amp 125VDC #14 to 2 AWG clamp terminals 0.5" (13 mm)
DIN-60-DC 60 Amp 150VDC #14 to 2 AWG clamp terminals 0.5" (13 mm)

* Approved for maximum VOC of 15O VDC by ETL for PV array applications only.

OutBack High Voltage DIN Mount Fuse Holders and Fuses

Fuse holders are DIN rail mount with #8 AWG set-screw type compression terminals. Touch-safe design and not rated for load make or load break usage. Maximum of eight fuseholders in one PSPV enclosure.

MODEL DESCRIPTION CURRENT RATING VOLTAGE RATING WIDTH
OBF-6-600VDC Fuse 6 Amp 600VDC N/A
OBF-10-600VDC Fuse 10 Amp 600VDC N/A
OBF-15-600VDC Fuse 15 Amp 600VDC N/A
OBFH-30-600VDC-DIN Fuse Holder 30 Amp 600VDC 0.7 " (18 mm)
Updated: Sep 20, 2015